Product ID:POLYURETHANE CURING SOLN; PB-105
MSDS Date:03/17/1994
FSC:8030
NIIN:00-241-2498
Kit Part:Y
MSDS Number: BWFLG

CROWN METRO AEROSPACE COATINGS, INC

ECHELON, DONALDSON CTR
GREENVILLE, SC 29606
US

Emergency Phone: 803-277-1870

Info Phone: 803-277-1870

Preparer: SOUTH

Cage: CROME

CROWN METRO AEROSPACE COATINGS INC

5695 GREENVILLE, SC 29606 US

Telephone: 803-277-1870

Cage: CROME

HEXAMETHYLENE DIISOCYANATE (VAPOR PRESSURE 0.05 MM HG @

CAS: 822-06-0

RTECS: MO1740000

Fraction By Weight: 2%

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

(HOMOPOLYMER) HEXAMETHYLENE DIISOCYANATE

CAS: 28182-81-2

RTECS: NQ9170000

Fraction By Weight: 70-80%

BUTYL ACETATE (VAPOR PRESSURE 8.0 MM HG @ 20C)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 10-20%

OSHA PEL 150 PPM;STEL 200 PPM

ACGIH TLV: 150 PPM;STEL 200 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

XYLENE (SARA III) (VAPOR PRESSURE 21 MM HG @ 20C)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 12%

OSHA PEL 100 PPM;STEL 150 PPM

ACGIH TLV: 100 PPM;STEL 150 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

2.2 POUNDS PER GALLON

RTECS: 9999999VO

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE: OVEREXPOSURE BY INHALATION MAY
CAUSE IRRITATION OF RESPIRATORY TRACT, HEADACHE, DIZZINESS, OR
DROWSINESS. SKIN OR EYE CONTACT: IRRITANT TO EYES & SKIN & SKIN
SENSITIVITY. CHRONIC: MAY AFFECT: A LLERGIC RESPIRATORY SKIN
REACTION, CENTRAL NERVOUS SYSTEM, KIDNEYS, LIVER, CARDIAC
SENSITIZATION.
Medical Cond Aggravated by Exposure:RESPIRATORY PROBLEMS

First Aid:INHALATION: REMOVE FROM EXPOSURE. EYE CONTACT: FLUSH
IMMEDIATELY WITH LARGE AMOUNTS OF RUNNING WATER FOR AT LEAST 15
MINUTES. SKIN CONTACT: REMOVE CONTAMINATED CLOTHING AND WASH SKIN
WITH SOAP AND WAT ER. INGESTION: DRINK WATER. IF NECESSARY, CONSULT
A PHYSICIAN FOR ANY OF THESE CONDITIONS.

Flash Point Method:SCC
Flash Point:78.0F,25.6C
Lower Limits:1.10
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL, OR CARBON
DIOXIDE.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION, AVOID
BREATHING VAPORS, VENTILATE AREA, & REMOVE WITH INERT ABSORBENT &
NON-SPARKING TOOLS. DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. BEFORE ATTEMPTING TO CLEAN UP SEE INGREDIENT
SECTION.

Handling and Storage Precautions:DO NOT TAKE INTERNALLY. CONTAINERS
SHOULD BE GROUNDED WHEN POURING. AVOID FREE FALL OF LIQUID IN
EXCESS OF A FEW INCHES.
Other Precautions:MAKE SURE THE DRUM IS COMPLETELY EMPTY BEFORE
ATTEMPTING TO WELD OR BRAZE. THE DRUM SHOULD BE INDUSTRIALLY
CLEANED PRIOR TO REUSE. DO NOT FLAME CUT, BRAZE, OR WELD WITHOUT A
NIOSH APPROVED RESPIRATOR OR APPROPRIATE VENTILATION.

Respiratory Protection:IF GENERAL DILUTN/LOCAL EXHAUST DOESN'T DILUTE
TWA/PEL,USE RESPRTRY PROTECTN:DON'T BREATH VAPOR/MIST.WEAR APPROP
FITTED NIOSH/OSHA RESPRTR.AIR LINE RESPRTR (TC19C)
RECOMMENDED.VAPOR/PARTIC (TC23C) WHE N ISOCYANATES 10X LESS THAN
TLV/PEL.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST TO KEEP TWA & LEL BELOW
ACCEPTABLE LIMITS AND REMOVE DECOMPOSITION PRODUCTS.
Protective Gloves:CHEM RESIST GLOVES-REPEATED/PROLONGED
Eye Protection:SAFETY EYEWARE TO PROTECT AGAINST SPLASH
Supplemental Safety and Health

HCC:F3
Boiling Pt:B.P. Text:200 TO 382F
Vapor Density:> AIR

Stability Indicator/Materials to Avoid:NO
WILL REACT WITH WATER OR WATER CONTAINING PRODUCTS TO GIVE OFF HEAT &
FUMES. DO NOT ALLOW WATER TO ENTER SEALED DRUMS.
Hazardous Decomposition Products:FUMES MAY CONTAIN CARBON MONOXIDE &
OXIDES OF NITROGEN. MAY PRODUCE HZD FUMES WHEN HEATED TO
DECOMPOSITION AS IN WELDING

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.